Customization: | Available |
---|---|
Type: | Lead-Acid Batteries |
Usage: | Car, Bus, Electric Bicycle, Boat, Valve Regulated Lead Acid Battery Automobile |
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specifications (mm) | Parameters | |||||
Head Diameter | Screw Diameter | Screw Pitch | Length | Condition | Test Project | Standard |
26mm | M20mm | 2.5mm | 26.7mm | Basic detetion | Opening Valve pressure | 12.5±2Kpa |
Closing Valve pressure | 11.5±2Kpa | |||||
Valve pressure defference | ≤1.0Kpa | |||||
Acid and corrosion resistance test | Opening Valve pressure | 12.5±2Kpa | ||||
Closing Valve pressure | 11.5±2Kpa | |||||
Valve pressure defference | ≤2.0Kpa | |||||
High and low temperature resistance test (high temperature 900C and low temperature -300C | Opening Valve pressure | 12.5±2Kpa | ||||
Closing Valve pressure | 11.5±2Kpa | |||||
Valve pressure defference | ≤2.0Kpa | |||||
Aging resistance test (high temperature 90 ºC low temperature - 30 ºC) | Opening Valve pressure | 12.5±2Kpa | ||||
Closing Valve pressure | 10.5±2Kpa | |||||
Valve pressure defference | ≤2.0Kpa | |||||
Battery water consumption test (75 ºC high temperature cycle test |
Mass change fraction | ≤3% | ||||
Working environment test | ~40ºC~+80ºC | normal | ||||
Rubber gasket | Shaw A hardness | 53±30 | ||||
Elongation at break after corrosion | ≥300% | |||||
Tensile strength after corrosion | ≥5Mpa | |||||
Compression set (90 ºC/22h) | ≤30% |